Description
The 680ES concrete chainsaw from ICS DIAMOND TOOLS is built to meet the operational demands of the general construction user. The 680ES is a flexible saw that stands alone in terms of reliability and value. It’s easy to start with the new multifunction lever to control choke, run, and stop functions.
Available with 12 in. (30 cm) and 14 in. (35 cm) guide bars and the entire line of FORCE3 Series diamond chain.
The distinctive black powerhead houses specially designed carburetion and ignition systems that work together to ensure easy starting, cooler operation and dependable performance at just about any elevation. Available with 12-inch (30 cm) and 14-inch (35 cm) guidebars and the entire line of MAX series diamond chain.
- Polyester air filter designed specifically for wet cutting
- Operates FORCE3™ diamond chain consumables up to 14 in. (35cm)
- Multifunction lever controls choke, throttle advance, run and stop modes
- Extended drive sprocket adapter offers easy chain assembly
- Deep cutting solution for obstructed or small openings
- Cut squares as small as 4 in. x 4 in. (10 cm x 10 cm)
- Easy-to-start in all weather
| Engine Type |
2-stroke, Air Cooled |
| Displacement |
76.5 cc (4.7 cu-in) |
| Horsepower |
3.7 kW (5 hp) @ 9,500 rpm |
| Torque |
4.1 Nm (36.3 in-lbs) @ 6,500 rpm |
| Engine Speed |
11500 +/- 500 rpm (max) / 2,800 – 3,200 rpm (Idle) |
| Chain Speed at Maximum Power |
34.5 m/s (6800 ft /min) |
| Weight |
9.5 kg (21 lbs) powerhead only |
| Dimensions |
46 cm (18 in) length / 29 cm (11.5 in) height / 25 cm (10 in) width |
| Starter |
Dust and water resistant |
| Ignition |
Special water resistant electronic ignition |
| Fuel ratio |
2% (50:1) gasoline-to-oil |
| Fuel Capacity |
0.88 liter (0.23 gallon) |
| Water Supply Requirement |
Minimum: 1.5 bar (20 psi) |
| Water Flow Requirement |
Minimum: 4 lpm (1 gpm) |
| Guaranteed Sound Power Level, Lwa (1) |
117 dB(A) (Kwa=3.0 dB(A)) |
| Equivalent Sound Pressure at the Operator’s Ear Lwa |
101.0 dB(A) (K = 2.0 dB(A)) |
| Vibration, ahv eq Concrete Cutting (2) |
7.2 m/s2 (K=1.0 m/s2) Front Handle/8.5 m/s2 (K=1.0 m/s2) Rear Handle |
1) Measured in accordance with ANSI S12.51-2012/ISO3741:2010 / (2) Measured in accordance with ISO5349=1:2001 and IS 22867:2011
