Description
The new 695XL features an easy-to-start engine with a higher energy ignition system and durable, long-lasting components including a new muffler, carburetor, and piston and cylinder.Based on the best-selling 695 saw platform, the 695XL is the highest horsepower ICS gas power cutter for frequent – use by general construction, utility contractors, and concrete professionals.
Available with 12 in. (30 cm), 16 in. (40cm) guide bars and the entire line of FORCE3, FORCE4, and PowerGrit Series diamond chains.
TECHNICAL SPECIFICATIONS
| Engine Type | 2-Stroke, Air Cooled |
| Displacement | 94cc (5.7 cu-in) |
| Horsepower | 4.8kW (6.4 hp) @ 9000 rpm |
| Torque | 5.7 Nm (50.4 in-lbs) @ 7200 rpm |
| Engine Speed | 9,300 +/- 150 rpm (max)/2,700 +/- 100 rpm (idle) |
| Chain Speed at Maximum Power | 28 m/s (5500 ft /min) |
| Weight | 9.5 kg (21 lbs) powerhead only |
| Dimensions | 46cm (18″) L x 36cm (14″) H x 30cm (12″) W |
| Starter | Recoil, dust, and water resistant |
| Ignition | Special water resistant electronic ignition |
| Fuel ratio | 2% (50:1) gasoline-to-oil |
| Fuel Capacity | 1 liter (0.26 gallon) |
| Water Supply Requirement | Minimum: 1.5 bar (20 psi) |
| Water Flow Requirement | Minimum: 4 lpm (1 gpm) |
| Guaranteed Sound Power Level, Lwa (1) | 115 dB(A); (Kwa=1.0 dB(A)) |
| Equivalent Sound Pressure at the Operator’s Ear Lwa | 104.6 dB(A) (K=1.0 dB(A)) |
| Vibration, ahv eq Concrete Cutting (2) | 3.6 m/s2 (K=1.0 m/s2) Front Handle/3.1 m/s2 (K=1.0 m/s2) Rear Handle |
| Vibration, ahv eq Pipe Cutting (2) | 5.62 m/s (K=0.2 m/s2) Front Handle/5.28 m/s2 (K=0.2 m/s2) Rear Handle |
